Energy-harvesting design aims to turn Wi-Fi signals into usable power

Energy-harvesting design aims to turn Wi-Fi signals into usable power
Terahertz waves are pervasive in our daily lives, and if harnessed, their concentrated power could potentially serve as an alternate energy source. Imagine, for instance, a cellphone add-on that passively soaks up ambient T-rays and uses their energy to charge your phone. Credit: José-Luis Olivares, MIT

Any device that sends out a Wi-Fi signal also emits terahertz waves —electromagnetic waves with a frequency somewhere between microwaves and infrared light. These high-frequency radiation waves, known as "T-rays," are also produced by almost anything that registers a temperature, including our own bodies and the inanimate objects around us.

Terahertz waves are pervasive in our daily lives, and if harnessed, their concentrated power could potentially serve as an alternate source. Imagine, for instance, a cellphone add-on that passively soaks up ambient T-rays and uses their energy to charge your phone. However, to date, waves are wasted energy, as there has been no practical way to capture and convert them into any usable form.

Now physicists at MIT have come up with a blueprint for a they believe would be able to convert ambient terahertz waves into a , a form of electricity that powers many household electronics.

Their design takes advantage of the quantum mechanical, or atomic behavior of the carbon material graphene. They found that by combining graphene with another material, in this case, boron nitride, the in graphene should skew their motion toward a common direction. Any incoming terahertz waves should "shuttle" graphene's electrons, like so many tiny air traffic controllers, to flow through the material in a single direction, as a direct current.

The researchers have published their results today in the journal Science Advances, and are working with experimentalists to turn their design into a physical device.

"We are surrounded by in the terahertz range," says lead author Hiroki Isobe, a postdoc in MIT's Materials Research Laboratory. "If we can convert that energy into an energy source we can use for daily life, that would help to address the energy challenges we are facing right now."

Isobe's co-authors are Liang Fu, the Lawrence C. and Sarah W. Biedenharn Career Development Associate Professor of Physics at MIT; and Su-yang Xu, a former MIT postdoc who is now an assistant professor chemistry at Harvard University.

Breaking graphene's symmetry

Over the last decade, scientists have looked for ways to harvest and convert ambient energy into usable electrical energy. They have done so mainly through rectifiers, devices that are designed to convert electromagnetic waves from their oscillating (alternating) current to direct current.

Most rectifiers are designed to convert low-frequency waves such as radio waves, using an electrical circuit with diodes to generate an electric field that can steer radio waves through the device as a DC current. These rectifiers only work up to a certain frequency, and have not been able to accommodate the terahertz range.

A few experimental technologies that have been able to convert terahertz waves into DC current do so only at ultracold temperatures—setups that would be difficult to implement in practical applications.

Instead of turning electromagnetic waves into a DC current by applying an external in a device, Isobe wondered whether, at a quantum mechanical level, a material's own electrons could be induced to flow in one direction, in order to steer incoming terahertz waves into a DC current.

Such a material would have to be very clean, or free of impurities, in order for the electrons in the material to flow through without scattering off irregularities in the material. Graphene, he found, was the ideal starting material.

Energy-harvesting design aims to turn Wi-Fi signals into usable power
This schematic figure, from the researchers’ paper, shows a green square that represents graphene on top of a square of another material. The red lines represent terahertz waves. The blue triangles represent antenna that surround the square to capture the terahertz waves and focus the waves to the square. Credit: Massachusetts Institute of Technology

To direct graphene's electrons to flow in one direction, he would have to break the material's inherent symmetry, or what physicists call "inversion." Normally, graphene's electrons feel an equal force between them, meaning that any incoming energy would scatter the electrons in all directions, symmetrically. Isobe looked for ways to break graphene's inversion and induce an asymmetric flow of electrons in response to incoming energy.

Looking through the literature, he found that others had experimented with graphene by placing it atop a layer of boron nitride, a similar honeycomb lattice made of two types of atoms—boron and nitrogen. They found that in this arrangement, the forces between graphene's electrons were knocked out of balance: Electrons closer to boron felt a certain force while electrons closer to nitrogen experienced a different pull. The overall effect was what physicists call "skew scattering," in which clouds of electrons skew their motion in one direction.

Isobe developed a systematic theoretical study of all the ways electrons in graphene might scatter in combination with an underlying substrate such as boron nitride, and how this electron scattering would affect any incoming electromagnetic waves, particularly in the terahertz frequency range.

He found that electrons were driven by incoming to skew in one direction, and this skew motion generates a DC current, if graphene were relatively pure. If too many impurities did exist in graphene, they would act as obstacles in the path of electron clouds, causing these clouds to scatter in all directions, rather than moving as one.

"With many impurities, this skewed motion just ends up oscillating, and any incoming terahertz energy is lost through this oscillation," Isobe explains. "So we want a clean sample to effectively get a skewed motion."

One direction

They also found that the stronger the incoming terahertz energy, the more of that energy a device can convert to DC current. This means that any device that converts T-rays should also include a way to concentrate those waves before they enter the device.

With all this in mind, the researchers drew up a blueprint for a terahertz rectifier that consists of a small square of graphene that sits atop a layer of and is sandwiched within an antenna that would collect and concentrate ambient terahertz radiation, boosting its signal enough to convert it into a DC current.

"This would work very much like a solar cell, except for a different frequency range, to passively collect and convert ambient energy," Fu says.

The team has filed a patent for the new "high-frequency rectification" design, and the researchers are working with experimental physicists at MIT to develop a physical device based on their design, which should be able to work at , versus the ultracold temperatures required for previous terahertz rectifiers and detectors.

"If a device works at room temperature, we can use it for many portable applications," Isobe says.

He envisions that, in the near future, terahertz rectifiers may be used, for instance, to wirelessly power implants in a patient's body, without requiring surgery to change an implant's batteries. Such devices could also convert ambient Wi-Fi signals to charge up personal electronics such as laptops and cellphones.

"We are taking a quantum material with some asymmetry at the atomic scale, that can now be utilized, which opens up a lot of possibilities," Fu says.

More information: Hiroki Isobe et al. High-frequency rectification via chiral Bloch electrons, Science Advances (2020). DOI: 10.1126/sciadv.aay2497

Journal information: Science Advances

This story is republished courtesy of MIT News (web.mit.edu/newsoffice/), a popular site that covers news about MIT research, innovation and teaching.

Citation: Energy-harvesting design aims to turn Wi-Fi signals into usable power (2020, March 30) retrieved 29 March 2024 from https://phys.org/news/2020-03-energy-harvesting-aims-wi-fi-usable-power.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Proposed transistor is made of graphene and a two-dimensional superconductor

3435 shares

Feedback to editors