First Solar Orbiter instrument sends measurements

First Solar Orbiter instrument sends measurements
Data collected with the Magnetometer (MAG) instrument during the deployment of the instrument boom of ESA's Solar Orbiter spacecraft show how the magnetic field decreases from the vicinity of the spacecraft to where the instruments are actually deployed. Solar Orbiter was launched on 10 February 2020 from NASA’s Kennedy Space Center in Cape Canaveral, Florida. The magnetometer’s two sensors were switched off about 21 hours after liftoff, and the boom deployment took place almost three days after liftoff, on 12 February. First measurements from MAG, received after the deployment of the high gain antenna on 13 Feburary, show the level of the magnetic field decrease by about one order of magnitude over the overall 30-minute deployment sequence. At first, the data reflected mostly the magnetic field of the spacecraft, whereas at the end of the procedure, scientists got the first glimpse of the significantly weaker magnetic field in the surrounding environment. The data in this graphic show the deployment of the second boom segment, which started around 19:04 UTC. The right half of the graph shows the value of the interplanetary magnetic field. Solar Orbiter carries a suite of 10 instruments, comprising in situ and remote-sensing ones, to observe the turbulent solar surface, the sun’s hot outer atmosphere, and changes in the solar wind. Remote-sensing payloads will perform high-resolution imaging of the sun's atmosphere – the corona – as well as the solar disc. In situ instruments will measure the solar wind and the solar magnetic field in the vicinity of the orbiter. Solar Orbiter is an ESA-led mission with strong NASA participation. The prime contractor is Airbus Defence and Space in Stevenage, UK. Credit: ESA; Data: ESA/Solar Orbiter/MAG

First measurements by a Solar Orbiter science instrument reached the ground on Thursday 13 February providing a confirmation to the international science teams that the magnetometer on board is in good health following a successful deployment of the spacecraft's instrument boom.

Solar Orbiter, ESA's new sun-exploring , launched on Monday 10 February. It carries ten , four of which measure properties of the environment around the spacecraft, especially electromagnetic characteristics of the , the stream of charged particles flowing from the sun. Three of these 'in situ' instruments have sensors located on the 4.4 m-long boom.

"We measure magnetic fields thousands of times smaller than those we are familiar with on Earth," says Tim Horbury of Imperial College London, Principal Investigator for the Magnetometer instrument (MAG). "Even currents in electrical wires make magnetic fields far larger than what we need to measure. That's why our sensors are on a boom, to keep them away from all the electrical activity inside the spacecraft."

Observing magnetic field as boom deploys

Ground controllers at the European Space Operations Centre in Darmstadt, Germany, switched on the magnetometer's two sensors (one near the end of the boom and the other close to the spacecraft) about 21 hours after liftoff. The instrument recorded data before, during and after the boom's deployment, allowing the scientists to understand the influence of the spacecraft on measurements in the space environment.

First Solar Orbiter instrument sends measurements
Data collected with the Magnetometer (MAG) instrument during the deployment of the instrument boom of ESA's Solar Orbiter spacecraft show how the magnetic field decreases from the vicinity of the spacecraft to where the instruments are actually deployed. Solar Orbiter was launched on 10 February 2020 from NASA’s Kennedy Space Center in Cape Canaveral, Florida. The magnetometer’s two sensors were switched off about 21 hours after liftoff, and the boom deployment took place almost three days after liftoff, on 12 February. First measurements from MAG, received after the deployment of the high gain antenna on 13 Feburary, show the level of the magnetic field decrease by about one order of magnitude over the overall 30-minute deployment sequence. At first, the data reflected mostly the magnetic field of the spacecraft, whereas at the end of the procedure, scientists got the first glimpse of the significantly weaker magnetic field in the surrounding environment. The data in this animated graphic show the deployment of the second boom segment, which started around 19:04 UTC. The right half of the graph shows the value of the interplanetary magnetic field. Solar Orbiter carries a suite of 10 instruments, comprising in situ and remote-sensing ones, to observe the turbulent solar surface, the sun’s hot outer atmosphere, and changes in the solar wind. Remote-sensing payloads will perform high-resolution imaging of the sun's atmosphere – the corona – as well as the solar disc. In situ instruments will measure the solar wind and the solar magnetic field in the vicinity of the orbiter. Solar Orbiter is an ESA-led mission with strong NASA participation. The prime contractor is Airbus Defence and Space in Stevenage, UK. Credit: Spacecraft: ESA/ATG Medialab; Data: ESA/Solar Orbiter/MAG

"The data we received shows how the magnetic field decreases from the vicinity of the spacecraft to where the instruments are actually deployed," adds Tim. "This is an independent confirmation that the boom actually deployed and that the instruments will, indeed, provide accurate scientific measurements in the future."

As the titanium/carbon-fibre boom stretched out over an overall 30-minute period on Wednesday, almost three days after liftoff, the scientists could observe the level of the magnetic field decrease by about one order of magnitude. While at the beginning they saw mostly the magnetic field of the spacecraft, at the end of the procedure, they got the first glimpse of the significantly weaker magnetic field in the surrounding environment.

"Measuring before, during, and after the boom deployment helps us to identify and characterise signals that are not linked to the solar wind, such as perturbations coming from the spacecraft platform and other instruments," says Matthieu Kretzschmar, of Laboratoire de Physique et Chimie de l'Environnement et de l'Espace in Orleans, France, Lead Co-investigator behind another sensor located on the boom, the high frequency magnetometer of the Radio and Plasma Waves instrument (RPW) instrument.

"The spacecraft underwent extensive testing on ground to measure its magnetic properties in a special simulation facility, but we couldn't fully test this aspect until now, in space, because the usually prevents us from reaching the needed very low level of magnetic field fluctuations," he adds.

Next, the instruments will have to be calibrated before true science can begin.

Warming up for science

First Solar Orbiter instrument sends measurements
Labelled diagram showing a cutaway of Solar Orbiter's suite of ten science instruments that will study the sun. There are two types: in situ and remote sensing. The in situ instruments measure the conditions around the spacecraft itself. The remote-sensing instruments measure what is happening at large distances away. Together, both sets of data can be used to piece together a more complete picture of what is happening in the sun’s corona and the solar wind. Credit: ESA/ATG media lab

"Until the end of April, we will be gradually turning on the in-situ instruments and checking whether they are working correctly," says Yannis Zouganelis, ESA's deputy project scientist for the Solar Orbiter mission. "By the end of April, we will have a better idea of the performance of the instruments and hopefully start collecting first scientific data in mid-May."

In addition to the instrument boom, the deployments of three antennas of the RPW instrument, which will study characteristics of electromagnetic and electrostatic waves in the solar wind, were successfully completed in the early hours of Thursday 13 February. The data of these specific deployments still need to be analysed.

In addition to the four in situ instruments, Solar Orbiter carries six remote-sensing instruments, essentially telescopes, that will be imaging the surface of the sun at various wavelengths, obtaining the closest ever views of our parent star.

"The remote-sensing instruments will be commissioned in the coming months, and we look forward to testing them further in June, when Solar Orbiter gets nearer to the sun," Yannis adds.

ESA’s Solar Orbiter mission takes a closer look at the sun than any European satellite before. The sophisticated probe, carrying ten instruments for imaging the surface of our star and measuring the properties of the environment in its vicinity, can be seen in this animation going through parts of the launch and activation sequence. Lofted to space by an Atlas V rocket, Solar Orbiter deploys its 18 m-long solar array (as measured from tip-to-tip), as well as a set of antennas and an instrument boom, as it embarks on its cruise towards the sun. The spacecraft takes advantage of the gravitational force of Venus and Earth to adjust its trajectory, which will place it into an elliptical orbit around the sun. Solar Orbiter will get as close as 42 million kilometres to the sun, about one-quarter of the distance between the sun and Earth. The orbit will allow Solar Orbiter to see some of the never-before-imaged regions of the sun, including the poles. Solar Orbiter’s instruments peek at the star through tiny windows in a 30 cm thick titanium foil shield, which protects the spacecraft against the scorching temperatures and constant bombardment by highly charged particles of the solar wind. Solar Orbiter is an ESA mission with strong NASA participation. Launch is scheduled for February 2020 from Cape Canaveral, Florida, US. Credit: ESA/ATG medialab

Unravelling the sun's mysteries

The combination of both sets of instruments will allow scientists to link what happens on the sun to the phenomena measured in the solar wind, enabling them to tackle mysteries such as the 11-year cycle of solar activity, the generation of the sun's and how solar wind particles are accelerated to high energies.

"The ten instruments onboard our mission will be playing together like instruments in an orchestra," says ESA Solar Orbiter project scientist Daniel Müller. "We have just started the rehearsal, and one by one, additional instruments will join. Once we are complete, in a few months' time, we will be listening to the symphony of the sun."

Citation: First Solar Orbiter instrument sends measurements (2020, February 18) retrieved 23 April 2024 from https://phys.org/news/2020-02-solar-orbiter-instrument.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Solar Orbiter: Ready for launch

209 shares

Feedback to editors