Researchers studied the fabrication of polymeric fibers for use in advanced health care

October 15, 2019 , American Institute of Physics
Mohan Edirisinghe leads a team at University College London studying the fabrication of polymeric nanofibers and microfibers -- very thin fibers made up of polymers. The fibers can be woven into textilelike structures but depending on the use, different fiber thicknesses may be necessary. To study the effects of various parameters on fiber fabrication, the researchers compared the characteristics of fibers created in different ways. This are photographs from video clips at different times showing behavior of the polymer solution in the transparent vessel with matching theoretical simulations and typical products at different rotation speeds and pressures. Credit: Hussain Alenezi, Muhammet Emin Cam and Mohan Edirisinghe

Mohan Edirisinghe leads a team of researchers at University College London studying the fabrication of polymeric nanofibers and microfibers—very thin fibers made up of polymers. The group describes a study comparing fabrication techniques for these fibers without the use of electric fields in Applied Physics Reviews.

For applications ranging from scaffolding for tissue engineering and drug delivery to bacterial and viral air filtration, polymeric fibers can be woven into textilelike structures with the characteristics required for the task. Depending on the use, different fiber thicknesses may be necessary. But the ability to fabricate thin fibers with consistent characteristics is important.

"When you have thinner fibers, you use lesser material, and you can weave a web—whether it's a scaffold or a filtration scaffold—much better," said Edirisinghe. "You can put more fiber strands in what you weave."

To study the effects of various parameters on fiber fabrication, the researchers compared the characteristics of fibers created in different ways. The conventional way of making fibers is by a process called centrifugal spinning. In centrifugal spinning, the polymer solution is placed in a reservoir. When the reservoir is rotated at , the polymer solution jets out in the form of fine fibers.

Edirisinghe and his team compared this to a method they invented and developed called pressure gyration. It functions broadly the same as centrifugal spinning, but with one key difference. High-pressure gas is applied inside the rotating vessel during the fabrication process.

They found increasing the in both techniques and increasing the applied pressure in the pressure gyration technique both lead to thinner, more consistent fibers.

"The pressure makes a hell of a lot of difference," Edirisinghe said.

For , polymeric fibers need to be fabricated in larger quantities and in a way that ensures uniformity from pot to pot. To address these concerns, the researchers were also interested in seeing how the was behaving inside the vessel while the fibers were being fabricated. For the first time, they fabricated the fibers in a transparent pot and used a high-speed camera to capture images during the process. They also compared the behavior to theoretical predictions.

In the future, the group plans to automate the process to make these nanofibers with optimal thickness and minimal waste. In addition, they are working on finding ways to make the material stronger and more suitable for biomedical applications by making fibers with a different interior and a bioactive exterior.

"If you take this technology to textiles where you can coat the fiber with some other smart sensing material, you can do miracles with them," Edirisinghe said. "There are lots of possibilities!"

More information: Hussain Alenezi et al. Experimental and theoretical investigation of the fluid behavior during polymeric fiber formation with and without pressure. Applied Physics Reviews 6, 041401 (2019); doi.org/10.1063/1.5110965

Journal information: Applied Physics Reviews

Provided by American Institute of Physics