The design, construction and characterization of new nanovibrational bioreactors for osteogenesis
In regenerative medicine, scientists aim to significantly advance techniques that can control stem cell lineage commitment. For example, mechanical stimulation of mesenchymal stem cells (MSCs) at the nanoscale can activate mechanotransduction pathways to stimulate osteogenesis (bone development) in 2-D and 3-D culture. Such work can revolutionize bone graft procedures by creating graft material from autologous or allogenic sources of MSCs without chemically inducing the phenomenon. Due to increasing biomedical interest in such mechanical stimulation of cells for clinical use, both researchers and clinicians require a scalable bioreactor system to provide consistently reproducible results. In a new study now published on Scientific Reports, Paul Campsie and a team of multidisciplinary researchers at the departments of biomedical engineering, computing, physics, and molecular, cell and systems biology engineered a new bioreactor system to meet the existing requirements.
The new instrument contained a vibration plate for bioreactions, calibrated and optimized for nanometer vibrations at 1 kHz, a power supply unit to generate a 30 nm vibration amplitude and custom six-well cultureware for cell growth. The cultureware contained magnetic inserts to attach to the bioreactor's magnetic vibration plate. They assessed osteogenic protein expression to confirm the differentiation of MSCs after initial biological experiments within the system. Campsie et al. conducted atomic force microscopy (AFM) of the 3-D gel constructs to verify that strain hardening of the gel did not occur during vibrational stimulation. The results confirmed cell differentiation to be the result of nano-vibrational stimulations provided by the bioreactor alone.
The increasing incidence of skeletal injuries due to age-related conditions such as osteoporosis and osteoarthritis is a metric of the depleting quality of human life. The development of treatments for increased bone density or fracture healing are prime targets for the regenerative potential of mesenchymal stem cells (MSCs). Researchers have demonstrated controlled osteogenesis (development of bones) of MSCs via mechanical stimulation using several methods, including passive and active strategies. Passive methods typically alter the substrate topography to influence the cell adhesion profile, while active methods include exposure to varied forces from external sources.
The present work by Campsie et al. intend to progress on pre-existing designs for the controlled osteogenesis of MSCs to construct a Good Manufacturing Practice (GMP) compatible system applicable for small scale clinical trials. Upon construction, the team used laser interferometry to accurately measure vibration displacement from the bioreactor's top plate and within the wells used for cultureware to validate the equipment they developed based on finite elemental analysis (FEA) models. The team used a direct digital synthesis waveform (DDS) generator and a reconstruction filter to remove high frequency components of the DDS output so as to generate a pure sine wave output of 1 kHZ for precise nanovibrations.
The research team validated the operation of the bioreactor system by performing biological experiments to quantify the osteogenic protein expression of MSCs exposed to nano-vibrational stimulation. They conducted AFM measurements on the collagen gel used in the experiments to determine that vibrations transmitted from the cultureware into the gel. Then they showed that the stiffness of the gel did not significantly increase in response to the nanovibrations that occurred.
Campsie et al. constructed the bioreactor with specific material choices and cultureware attachment to deliver optimal nanoscale vibrations between the frequencies of 1 Hz and 5 kHz. They ensured the resonant frequency of the apparatus to be well above the frequency of operation to prevent resonant amplification or damping. To determine the appropriate dimensions of the device, the research team performed FEA using ANSYS Workbench software. The scientists created the bioreactors inexpensively by using 13 to 15 piezo arrays for its construction. The product design allowed distinct alternating bands of minimum and maximum displacement for cells to receive inconsistent levels of vibrations across the cultureware. The team estimated the intrinsic resonance frequency of the piezoactuators and other device components to understand their impact on the experimental setup.
The research team then modified the surface chemistry of the plastic cultureware to aid cell adhesion and proliferation using plasma surface activation to increase the surface energy of the polymer. After five minutes of air-based plasma treatment, they cultured human osteoblast-like cells to observe increased cell attachment to the cultureware. They measured the water contact angle of the polymer to determine the surface energy of the modification and surface wettability. The scientists demonstrated proof-of-principle on plasma activation of polymer cultureware and its impact on surface wettability for favorable cell attachment. They aimed to further develop cultureware surfaces similarly to ensure their stability and shelf life.
The research team significantly improved the design of the bioreactor in the present work to form a lighter base compared to the prototype they previously presented. They used an AD9833 power waveform generator for power supply with easy tuning and maintained appropriate filtering to derive a pure 1 kHz sine wave drive signal. The researchers obtained a power spectrum of the pre- and post-filtered signal to estimate the power spectral density of the generator. They verified the FEA modeling and calibration of the bioreactor using a laser interferometer to determine nanoscale changes in displacement. The scientists used prismatic reflective tape bonded to the bottom surface of each well to measure the cultureware well dimensions that were magnetically attached to the bioreactor.
This technology has huge scope to generate a 3-D mineralized matrix from MSCs seeded in a collagen gel to form bone scaffolds. For example, cultured cells received a periodic acceleration force during vibration, which acted on the cell membrane and cytoskeleton to induce osteogenesis. The effect could also be related to environmental stiffness within the cell culture media, impacting stem cell differentiation and inducing osteogenesis in MSCs instead. To differentiate the cause, Campsie et al. used AFM to detect any change in stiffness while they nanovibrated the collagen gel. They did not observe significant effects of strain hardening within the gel and the Young's modulus maintained values of soft collagen gels; thus attributing cell differentiation to nanovibration alone.
During nanovibration, the cells underwent differentiation to form osteogenic lineages observed by the moderate upregulation of genes relative to bone development. Since bone-related protein expressions were more of a definitive measure of this switch, the scientists tested nanovibrations for 3 weeks with stimulated vs. non-stimulated MSCs for known osteogenic-related protein expression. They observed the expression of Runt-related transcription factor 2 (RUNX2), osterix (OSX), osteopontin (OPN), osteocalcin (OCN) and alkaline phosphatase (ALP) proteins, compared to the non-stimulated control. Expression of the protein biomarkers of osteogenic differentiation signified the capability of the new design bioreactors to successfully stimulate MSC osteogenesis.
In this way, Paul Campsie and colleagues developed a bioreactor system that functioned adequately on the scale of a research project or small clinical trial. The equipment provided mechanical stimulation with an amplitude approximating 30 nm at a frequency of 1 kHz. In response to the growing interest on mechanotransduction to control cell behavior and stem cell differentiation in bone research, the research team optimized the system to deliver a broader range of frequencies. The new work will open an entirely new field of mechanobiology, with as yet unforeseen potential to stimulate other cell types via 'nanokicking". Future work will focus on an improved system to provide mechanical stimulation to larger quantities of cells.
More information: Paul Campsie et al. Design, construction and characterisation of a novel nanovibrational bioreactor and cultureware for osteogenesis, Scientific Reports (2019). DOI: 10.1038/s41598-019-49422-4
Penelope M. Tsimbouri et al. Stimulation of 3-D osteogenesis by mesenchymal stem cells using a nanovibrational bioreactor, Nature Biomedical Engineering (2017). DOI: 10.1038/s41551-017-0127-4
Nathaniel Huebsch et al. Harnessing traction-mediated manipulation of the cell/matrix interface to control stem-cell fate, Nature Materials (2010). DOI: 10.1038/nmat2732
Shaun N. Robertson et al. Control of cell behaviour through nanovibrational stimulation: nanokicking, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences (2018). DOI: 10.1098/rsta.2017.0290
© 2019 Science X Network