Generating multiphoton quantum states on silicon

Generating multiphoton quantum states on silicon
Schematic configuration of the experimental system to generate and characterize the multiphoton quantum state with a silicon nanophotonic waveguide. A pulse erbium-doped fiber laser with a repetition rate of 100 MHz was used as the pump light. After a VOA and a prefilter with a bandwidth of 100 GHz, the pump light was input into a Sagnac loop to generate the polarization-encoding quantum state. A postfilter with a bandwidth of 200 GHz was used to block the pump light. A DWDM filter was used to demultiplex photon pairs into the corresponding frequency channels, and a normal architecture for polarization state tomography was used to ascertain the quality of the entangled states. VOA variable optical attenuator, HWP half waveplate, PBS polarization beam splitter, QWP quarter waveplate, PC polarization controller, SNSPD superconducting nanowire single-photon detector. Credit: Light: Science & Applications, doi: 10.1038/s41377-019-0153-y

In a recent study now published in Light: Science & Applications, Ming Zhang, Lan-Tian Feng and an interdisciplinary team of researchers at the departments of quantum information, quantum physics and modern optical instrumentation in China, detailed a new technique to generate photon-pairs for use in quantum devices. In the study, they used a method known as four-wave mixing to allow three electromagnetic fields to interact and produce a fourth field. The team created the quantum states in a silicon nanophotonic spiral waveguide to produce bright, tunable, stable and scalable multiphoton quantum states. The technology is comparable with the existing fiber and integrated circuit manufacturing processes to pave the way to engineer a range of new generation photonic quantum technologies for applications in quantum communication, computation and imaging. The multiphoton quantum sources detailed in the work will play a critical role to improve the existing understanding of quantum information.

The scientists generated multiphoton quantum states using a single-silicon nanophotonic waveguide and detected four-photon states with a low pump power of 600 µW to achieve experimental multiphoton quantum interference verified with quantum state tomography. Zhang and Feng et al. recorded the quantum interference visibilities at a value greater than 95 percent with . The multiphoton quantum source is fully compatible with on-chip processes of quantum manipulation and quantum detection to form large-scale quantum photonic integrated circuits (QPICs). The work has significant potential for multiphoton quantum research.

Multiphoton quantum sources are critical to build several practical platforms for quantum communication, computation, simulation and metrology. Physicists have made great efforts to realize high quality, bright and scalable multiphoton quantum states in previous work, to activate powerful quantum technologies by multiplexing several biphoton sources to generate eight-photon and 10-photon entanglement. However, the efficacy of such multiplexing systems decreased with the number of entangled photons. At present, quantum photonic integrated circuits (QPCIs) and silicon-on-insulator (SOI) technology remain promising to realize high quality photon-pair sources.

Generating multiphoton quantum states on silicon
Schematic diagram of the experimental system to generate and characterize the multiphoton quantum states with a silicon nanophotonic waveguide. The experimental setup contains a (1) pump laser modulator, (2) the photon source and (3) the state analyzer. The scientists used the combined HWP (half-wave plates, red) and QWP (quarter-wave plates, blue) inserted between the PBS (polarization beam splitter, green) and the chip to control optical polarization and maximize the coupling efficiency of a photon pair. Credit: Light: Science & Applications, doi: 10.1038/s41377-019-0153-y

Silicon has several advantages as a substrate to implement QPICs, which include third-order optical nonlinearity of the material and ultra-high refraction index contrast for applications as SOI nanophotonic waveguides. Silicon is also compatible with complementary metal-oxide semiconductor (CMOS) processes—attractive for large-scale photonic integration. While these advantages have allowed physicists to experimentally realize biphoton quantum sources, multiphoton quantum states on silicon still remain to be generated and reported.

In the present work, Zhang et al. generated four-photon polarization encoding quantum states using degenerated spontaneous four-wave mixing (SFWM) in a silicon spiral waveguide. The scientists first demonstrated biphoton Bell entanglement quantum states with high brightness (270 kHz) and a high coincidence to accidental ratio (CAR, approximating 230) at a low pump power (120 µW). Thereafter, using the two biphoton Bell entangled states, Zhang et al generated the four-photon quantum state (with a pump power as low as 600 µW). The scientists projected this quantum product state to form a Greenberger-Horne-Zeilinger (GHz) state (i.e. a state in quantum information theory with at least three subsystems or particles) with 50 percent probability for further use in quantum information applications.

Generating multiphoton quantum states on silicon
Experiment results of two-photon coincidences between different combinations of the selected five pairs of signal-idler channels. Here the pump power injected to the Sagnac loop is 120 μW. The two-photon coincidences were measured for the selected five pairs of signal-idler channels. Credit: Light: Science & Applications, doi: 10.1038/s41377-019-0153-y

Zhang et al. constructed the experimental setup in three parts to contain the (1) pump-laser modulator, (2) the photon source and (3) the state analyzer. In the pump-laser modulator they introduced a linearly polarized pulse erbium-doped fiber laser as the pump source with a repetition frequency of 100 MHz and a pulse duration time of 90 femtoseconds (fs). The scientists coordinated the pump light to pass through a 100 GHz bandwidth pre-filter, followed by a polarization controller (PC) and an optical circulator to finally couple into the photon source. They calculated the coherence time of the pulse laser light to be 20 picoseconds (ps) after going through the 100 GHz bandwidth prefilter and the propagation loss in the silicon spiral waveguide was approximately 1 dB/cm.

Compared to multiphoton quantum states proposed with previous Spontaneous Four Wave Mixing (SFWM) processes, the present work used a silicon nanowire source with near-zero broadband dispersion. The experimental setup with the silicon nanowire did not demonstrate Raman scattering noise, which therefore greatly enhanced the number of photon pairs generated. Unlike with microresonators, Zhang et al. did not need to tune the operation wavelength in the experimental setup since they used silicon spiral waveguides instead. The scientists used grating couplers to couple-in the pump light and couple-out the generated photon pairs in the setup. As part of the photon source, Zhang et al. used a configuration with a Sagnac interferometer – a popular and self-stabilized scheme to generate polarization-entangled states.

The experimental Sagnac interferometer contained two half-wave plates (HWPs), two quarter wave plates (QWPs), a polarization beam splitter (PBS) and the silicon spiral waveguide approximating a length of 1 cm to form a simple structure and compact footprint (170 x 170 µm2). The scientists used the combined HWP and QWP inserted between the PBS and the chip to control optical polarization and maximize the coupling efficiency of a photon pair. In the experiment, the on-chip generated photon pairs (idler and signal photons) could be superposed together in both directions (clockwise and counterclockwise) for output from the Sagnac loop. At this point, the scientists used a dense wavelength-division-multiplexing (DWDM) filter (fiber-optic transmission technique) to separate the signal and idler photons, or demultiplex them. They were thus able to freely select the photon pairs of any combined frequency channel via frequency detuning. The scientists noted that after going through the DWDM filters, the polarization and quantum states of the were unchanged.

Generating multiphoton quantum states on silicon
Characterization of biphoton polarization-entangled states. (a) and (b) are twofold coincidences as a function of the idler polarizer angle when the signal polarizer angle was kept at 0° (red) and 45° (black), respectively. The error bar was obtained from the square root of the experimental data. (c) and (d) give the real (Re) and imaginary (Im) parts of the ideal density matrix and the measured density matrix of the biphoton entangled state from frequency channels ±5, respectively. The fidelity was 0.95 ± 0.01, confirming that the generated biphoton quantum state was of high quality and very close to the ideal maximally entangled states. Credit: Light: Science & Applications, doi: 10.1038/s41377-019-0153-y

Zhang et al. then characterized the quality of the biphoton state generated in the experiment. For this, they selected five pairs of frequency channels used in the study to generate the signal and idler photons, to test the stability of the system. They measured the two-photon coincidences between different combinations of signal and idler channels and showed that the crosstalk was negligible for most frequency channels. After calculating the maximal polarization-entangled Bell state, they confirmed the existence of entanglement and high fidelity of the biphoton state. They credited the high coincidence-to-accidental ratio (CAR) observed to the ultralow nonlinear noise in the setup; necessary to generate multiphoton entanglement for further quantum information applications.

For complete characterization, the scientists connducted quantum state tomography to reconstruct the experimental state density matrix architecture by completing multiple measurements of the relevant quantum state. The results confirmed that the generated biphoton quantum states are of high quality to approach the ideal maximally entangled states.

Generating multiphoton quantum states on silicon
Characterization of four-photon polarization-encoding quantum states. (a) and (b) are fourfold coincidences as a function of the idler polarizer angles when the signal polarizer angles were kept at 0° (red) and 45° (black), respectively. The error bar was obtained from the square root of the experimental data. (c) and (d) give the real (Re) and imaginary (Im) parts of the ideal density matrix and the measured density matrix of the four-photon quantum states, respectively. The fidelity was 0.78 ± 0.02, which is completely satisfactory for further quantum information processing. Credit: Light: Science & Applications, doi: 10.1038/s41377-019-0153-y

The scientists then conveniently generated multiphoton entangled states by multiplexing the biphoton states in different frequency channels. They obtained a fourfold coincidence rate and showed the observed four-photon state as the tensor product of two biphoton entangled Bell states. The four-photon interference patterns agreed with the theoretical prediction, to unfold differently from the previously observed biphoton entangled states. Based on the outcomes of a clear interference pattern and high interference visibilities, Zhang et al. verified the feasibility of the experimental technique to establish on-chip multiphoton quantum states. As before, the scientists obtained quantum state tomography of the four-photon quantum states to reconstruct the density matrix, yielding satisfactory results for further quantum information applications.

In this way, the scientists experimentally demonstrated the generation of four-photon quantum states using a silicon nanophotonic spiral waveguide. Zhang et al. aim to improve the photon collection efficiency to increase the number of entangled photons in the system in the future. The multiphoton quantum state source developed in the study is compatible with contemporary fiber and chip-scale architectures for large scale production. Zhang et al. therefore propose the integration of the attractive features as a scalable and practical platform for future quantum processing applications.

More information: Ming Zhang et al. Generation of multiphoton quantum states on silicon, Light: Science & Applications (2019). DOI: 10.1038/s41377-019-0153-y

Lucia Caspani et al. Integrated sources of photon quantum states based on nonlinear optics, Light: Science & Applications (2017). DOI: 10.1038/lsa.2017.100

Alán Aspuru-Guzik et al. Photonic quantum simulators, Nature Physics (2012). DOI: 10.1038/nphys2253

Yin-Hai Li et al. On-Chip Multiplexed Multiple Entanglement Sources in a Single Silicon Nanowire, Physical Review Applied (2017). DOI: 10.1103/PhysRevApplied.7.064005

© 2019 Science X Network

Citation: Generating multiphoton quantum states on silicon (2019, May 9) retrieved 28 March 2024 from https://phys.org/news/2019-05-multiphoton-quantum-states-silicon.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Secure information transmission over 500m fiber links based on quantum technologies

414 shares

Feedback to editors