Researchers improve method to recycle and renew used cathodes from lithium-ion batteries

Researchers improve method to recycle and renew used cathodes from lithium-ion batteries
Nanoengineering professor Zheng Chen holds vials of recycled cathode particles. Credit: UC San Diego Jacobs School of Engineering

Researchers at the University of California San Diego have improved their recycling process that regenerates degraded cathodes from spent lithium-ion batteries. The new process is safer and uses less energy than their previous method in restoring cathodes to their original capacity and cycle performance.

Zheng Chen, a professor of nanoengineering who is affiliated with the Sustainable Power and Energy Center at UC San Diego, led the project. The work was published in Advanced Energy Materials.

"Due to the rapid growth of electric vehicle markets, the worldwide manufacturing capacity of is expected to reach hundreds of gigawatt hours per year in the next five years," Chen said. "This work presents a solution to reclaim the values of end-of-life -ion batteries after 5 to 10 years of operation."

Chen's team previously developed a direct recycling approach to recycle and regenerate degraded cathodes. It replenishes lithium ions that cathodes lose over extended use and restores their atomic structures back to their original states. However, that process involves pressurizing a hot lithium salt solution of cathode particles to around 10 atmospheres. The problem is this pressurizing step raises costs and requires extra safety precautions and special equipment, said Chen.

So the team developed a milder process to do the same job at ambient pressure (1 atmosphere). The key was using eutectic lithium salts—a mixture of two or more salts that melts at temperatures much lower than either of its components. This combination of solid lithium salts produces a solvent-free liquid that researchers can use to dissolve degraded cathode materials and restore lithium ions without adding any extra pressure in the reactors.

The new recycling method involves collecting cathode particles from spent lithium ion batteries and then mixing them with a eutectic lithium salt solution. The mixture is then heat treated in two steps: it is first heated to 300 C, then it goes through a short annealing process in which it is heated to 850 C for several hours and then cooled naturally.

Researchers improve method to recycle and renew used cathodes from lithium-ion batteries
Illustration of the process to restore lithium ions to degraded NMC cathodes using eutectic molten salts at ambient pressure. Credit: Advanced Energy Materials/Chen lab

Researchers used the method to regenerate NMC (LiNi0.5Mn0.3Co0.2), a popular cathode containing nickel, manganese and cobalt, which is used in many of today's electric vehicles.

"We made new cathodes from the regenerated particles and then tested them in batteries built in the lab. The regenerated cathodes showed the same capacity and cycle performance as the originals," said Yang Shi, the first author who performed this work as a postdoctoral researcher in Chen's lab at UC San Diego.

"In an end-of-life , the cathode material loses some of its lithium. The cathode's crystal structure also changes such that it's less capable of moving ions in and out. The that we developed restores both the cathode's lithium concentration and back to their original states," Shi said.

The team is tuning this process so that it can be used to recycle any type of cathode materials used in lithium-ion and sodium-ion batteries.

"The goal is to make this a universal recycling process for all cathode materials," Chen said. The team is also working on a process to recycle degraded anodes, such as graphite as well as other materials.

Chen is also collaborating with UC San Diego nanoengineering professor Shirley Meng, who is the director of the Sustainable Power and Energy Center, to identify subtle changes in the microstructure and local composition using high-resolution microscopic imaging tools.

More information: Yang Shi et al, Ambient‐Pressure Relithiation of Degraded Li x Ni 0.5 Co 0.2 Mn 0.3 O 2 (0 < x < 1) via Eutectic Solutions for Direct Regeneration of Lithium‐Ion Battery Cathodes, Advanced Energy Materials (2019). DOI: 10.1002/aenm.201900454

Journal information: Advanced Energy Materials

Citation: Researchers improve method to recycle and renew used cathodes from lithium-ion batteries (2019, April 17) retrieved 28 March 2024 from https://phys.org/news/2019-04-method-recycle-renew-cathodes-lithium-ion.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Recycling and reusing worn cathodes to make new lithium ion batteries

145 shares

Feedback to editors