New method eliminates guesswork when lenses go freeform
Lenses and mirrors with freeform surfaces enable designers to focus light within optical devices that are lighter, more compact, and more effective than ever before.
But until now, determining which freeform surfaces will work best—if at all—in a given configuration of mirrors and lenses has been a time-consuming and often expensive process of trial and error.
It doesn't have to be that way anymore.
In a paper in Nature Communications, lead author Aaron Bauer, a senior research engineer at the University of Rochester's Center for Freeform Optics (CeFO), combines theory and practice in a step-by-step method that eliminates much of the guesswork.
"Aaron has developed a process to design with freeform surfaces that can be applied very generally," says coauthor Jannick Rolland, CeFO director and Brian F. Thompson Professor of Optical Engineering. "It's really beautiful and even at times feels like magic."
She believes the findings will help accelerate the adoption of freeform optics in industry. "People will no longer say 'Oh, it's too expensive to build with freeform optics,'" she says. "Because now you can make something that may cost a tenth of what it would have cost otherwise."
Laying the groundwork
For as long as mirrors and lenses have been packaged together in telescopes, spectrometers, and a host of other optical devices, performance has been defined by how well those elements are able to keep a beam of light focused with minimal "aberration."
Traditionally, optical designers have relied on rotationally symmetric optical surfaces, because their design and manufacture was relatively straightforward.
Within the last 20 years, advances in high-speed micro milling, computer-controlled lens polishing, and ion beam etching, among other technologies, have made asymmetric freeform surfaces more feasible.
In a paper in 2014, Kyle Fuerschbach, a former member of the Rolland Lab, laid the theoretical framework for freeform aberrations theory.
"But we still didn't have a systematic process to design with that theory," Rolland says.
Putting two and two together
Bauer, in the meantime, was working alongside Fuerschbach, designing a head-worn display using freeform surfaces.
"I noticed that there were very common patterns of aberrations that were always popping up, and limiting my system from going any further," Bauer says. Moreover, "those patterns of aberration matched the ones that Kyle predicted would be corrected by freeform surfaces. So, I put two and two together."
The method he came up with starts with the initial "folding geometry" (alignment of mirrors and lenses) contemplated for a design, and then, based on an analysis of the various aberrations produced by that alignment, predicts:
- whether freeform surfaces could minimize those aberrations and, if so,
- which freeform surfaces should be used for maximum effect.
"Freeform surfaces are not a universal solution for correcting every aberration," Bauer notes. "So, what our method does is to allow designers to analyze all of these geometries ahead of time, in order to predict whether or not there would be a good solution."
That's far better than the "brute force" approach where "people heuristically try various freeform surfaces into a design," Rolland says. "Even if it eventually works, you could end up with a system where the departure of the surfaces is much larger than they would be otherwise, because all those freeform surfaces may be fighting each other. And if it does not work, there is nowhere go as a designer."
By using Bauer's method instead, she says, "you will be able to design something that is a lot simpler, and that will be easier to manufacture and test. Furthermore, the method will quickly and unequivocally provide insight into why a given geometry might be intrinsically limited, which is essential for designers."
More information: Aaron Bauer et al. Starting geometry creation and design method for freeform optics, Nature Communications (2018). DOI: 10.1038/s41467-018-04186-9
Provided by: University of Rochester