Silicon nanowires fabricated via imprinting technology could be the future for transistor-based biosensors

Silicon nanowires fabricated via imprinting technology could be the future for transistor-based biosensors
[Left] Schematic of a DG FET, [middle] SEM image of a cross-section of SiNWs fabricated on a silicon-on-insulator wafer and [right] change in the response voltage of planar and SiNW pH sensors for a wide range of pH (3–10). Credit: ©2016 Cheol-Min Lim, In-Kyu Lee, Ki Joong Lee, Young Kyoung Oh, Yong-Beom Shin and Won-Ju Cho.

Korean researchers are improving the fabrication of transistor-based biosensors by using silicon nanowires on their surface.

The team, led by Won-Ju Cho of Kwangwoon University in Seoul, based their device on the 'dual-gate field-effect transistor' (DG FET).

When molecules bind on a field-effect transistor, a change happens in the surface's electric charge. This makes FETs good candidates for detecting biological and chemical elements. Dual-gate FETs are particularly good candidates because they amplify this signal several times. But they can still be improved.

The team used a called 'nanoimprint lithography' to fabricate silicon nanowires onto the surface of a DG FET and compared its sensitivity and stability with conventional DG FETs.

Field-effect transistors using silicon nanowires have already been drawing attention as promising biosensors because of their high sensitivity and selectivity, but they are difficult to manufacture. The size and position of silicon nanowires fabricated using a bottom-up approach, such as , cannot always be perfectly controlled. Top-down approaches, such as using an electron or ion beam to draw nanorods onto a surface, allow better control of size and shape, yet they are expensive and limited by low throughput.

Cho and his colleagues fabricated their silicon nanowires using nanoimprint lithography. In this method, a thin layer of silicon was placed on top of a substrate. This layer was then pressed using a nanoimprinter, which imprints nano-sized wire-shaped lines into the . The areas between separate lines were then removed using a method called dry etching, which involves bombarding the material with chlorine ions. The resultant were then added to a DG FET.

The team found that their device was more stable and sensitive than conventional DG FETs. "We expect that the -nanowire DG FET sensor proposed here could be developed into a promising label-free sensor for various biological events, such as enzyme–substrate reactions, antigen–antibody bindings and nucleic acid hybridizations [a method used to detect gene sequences]," conclude the researchers in their study published in the journal Science and Technology of Advanced Materials.

More information: Cheol-Min Lim et al. Improved sensing characteristics of dual-gate transistor sensor using silicon nanowire arrays defined by nanoimprint lithography, Science and Technology of Advanced Materials (2017). DOI: 10.1080/14686996.2016.1253409

Citation: Silicon nanowires fabricated via imprinting technology could be the future for transistor-based biosensors (2017, March 1) retrieved 29 March 2024 from https://phys.org/news/2017-03-silicon-nanowires-fabricated-imprinting-technology.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Eco-friendly production of silicon nanowires

7 shares

Feedback to editors