First images from Adaptive Optics Lucky Imager (AOLI)

First Images from Adaptive Optics Lucky Imager (AOLI)
Images obtained during the commissioning of the AO system, AOLI, in May, 2016. Left: Open-loop image of a star whose size corresponds approximately to the full width of the brightness profile at half maximum, or 2.2 arcsec. Right: closed-loop image of the same star, this time the size of the brightness profile is only 0.15 arcsec. Only AO correction is applied. During commissioning the AOLI team observed a number of binaries, multiple star systems and globular clusters in the Sloan i' band, on which they closed the AO loop successfully. This animation shows the AO loop closing on a bright start, including the WFS readout (bottom left), and plots of the FWHM RMS (top right) and WFS performance (Zernike modes, bottom right). Credit: University of Cologne - Universität zu Köln

The Adaptive Optics Lucky Imager (AOLI) on the William Herschel Telescope (WHT) has obtained its first adaptive-optics closed-loop results, an important milestone in the development of this state-of-the-art instrument that aims at combining adaptive optics (AO) and lucky imaging (LI) to obtain the highest-ever resolution images at visible wavelengths from the ground.

High-resolution visible imaging is currently only possible with the Hubble Space Telescope (HST). With HST's lifecycle coming to an end, it is important to investigate new observational techniques capable of providing similar resolutions from the ground. Achieving the highest possible imaging resolutions requires, however, the largest telescope apertures, and this comes at the cost of increased atmospheric distortion.

Two main techniques employed today, AO and LI, are unable to provide diffraction-limited imaging in the visible. AO is mainly used at infrared wavelengths while LI reduces in effectiveness on telescopes greater than 2.5 metres in diameter. The limitations of both techniques can be overcome by combining them to provide diffraction-limited imaging at .

AOLI is being developed as a European collaboration, and combines AO and LI in a dedicated instrument for the first time. Initially designed for use on the WHT, AOLI uses a low-order AO system to reduce the effects of atmospheric turbulence plus an LI-based science camera. AOLI comprises a deformable mirror with 241 actuators, a pick-off guide-star system, a Tomographic Pupil Image Wavefront Sensor (TPI-WFS), used for the first time with and which provides significant sky-coverage using natural guide stars alone, and a 100-Hz loop system. Professor Lucas Labadie and his team from the University of Cologne's Institute of Physics I were responsible for the definition and procurement of the optics, developing the scientific data reduction software, and supporting the science programs for the AOLI camera.

The AOLI team plans to fully implement AO and LI modes in the coming months, and to reach limiting magnitude ~16 for natural pick-off guide stars.

Citation: First images from Adaptive Optics Lucky Imager (AOLI) (2016, July 27) retrieved 28 March 2024 from https://phys.org/news/2016-07-images-optics-lucky-imager-aoli.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

First light for the Four Laser Guide Star Facility on ESO's Very Large Telescope

19 shares

Feedback to editors