Color printing at highest resolution possible enabled by use of arrays of metal-coated nanostructures

Color printing at highest resolution possible enabled by use of arrays of metal-coated nanostructures
Variation in post size and spacing in the metal array alters which incoming wavelength of light (red, green or blue) is reflected back. Reproduced from Ref. 1 © 2012 K. Kumar et al.

Commercial laser printers typically produce pin-sharp images with spots of ink about 20 micrometers apart, resulting in a resolution of 1,200 dots per inch (dpi). By shrinking the separation to just 250 nanometers—roughly 100 times smaller—a research team at A*STAR can now print images at an incredible 100,000 dpi, the highest possible resolution for a color image. These images could be used as minuscule anti-counterfeit tags or to encode high-density data.

To print the image, the team coated a silicon wafer with insulating hydrogen silsesquioxane and then removed part of that layer to leave behind a series of upright posts of about 95 high. They capped these nanoposts with layers of chromium, silver and gold (1, 15 and 5 nanometers thick, respectively), and also coated the wafer with metal to act as a backreflector.

Each color pixel in the image contained four posts at most, arranged in a square. The researchers were able to produce a rainbow of colors simply by varying the spacing and diameter of the posts to between 50 nanometers and 140 nanometers.

When light hits the thin metal layer that caps the posts, it sends ripples—known as plasmons—running through the electrons in the metal. The size of the post determines which are absorbed, and which are reflected (see image).

The plasmons in the metal caps also cause electrons in the backreflector to oscillate. "This coupling channels energy from the disks into the backreflector plane, thus creating strong absorption that results in certain colors being subtracted from the ," says Joel Yang, who led the team of researchers at the A*STAR Institute of Materials Research and Engineering and the A*STAR Institute of High Performance Computing.

Printing images in this way makes them potentially more durable than those created with conventional dyes. In addition, color images cannot be any more detailed: two adjacent dots blur into one if they are closer than half the wavelength of the light reflecting from them. Since the wavelength of visible light ranges about 380–780 nanometers, the nanoposts are as close as is physically possible to produce a reasonable range of colors.

Although the process takes several hours, Yang suggests that a template for the nanoposts could rapidly stamp many copies of the image. "We are also exploring novel methods to control the polarization of light with these nanostructures and approaches to improve the color purity of the pixels," he adds.

More information: Kumar, K. et al. Printing colour at the optical diffraction limit. Nature Nanotechnology 7, 557–561 (2012). www.nature.com/nnano/journal/v … /nnano.2012.128.html

Journal information: Nature Nanotechnology

Citation: Color printing at highest resolution possible enabled by use of arrays of metal-coated nanostructures (2013, April 11) retrieved 28 March 2024 from https://phys.org/news/2013-04-highest-resolution-enabled-arrays-metal-coated.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

First full colour images at 100,000 dpi resolution with help of nanotechnology

0 shares

Feedback to editors