Artificial moth eyes enhance the performance of silicon solar cells

Artificial moth eyes enhance the performance of silicon solar cells
Moth eyes are highly antireflective due to their surface nanostructure.

Mimicking the texture found on the highly antireflective surfaces of the compound eyes of moths, we use block copolymer self assembly to produce precise and tunable nanotextured designs in the range of ~20 nm across macroscopic silicon solar cells. This nanoscale texturing imparts broadband antireflection properties and significantly enhances performance compared with typical antireflection coatings. Proper design of an antireflection coating involves managing the refractive index mismatch at an abrupt optical interface. The most straightforward approach introduces a single layer of an intermediate optical index atop of a surface to create a system that engenders destructive interference in reflected light. This usually provides full antireflection at only a single wavelength. Increasingly broadband coverage, for application in transparent window coatings, military camouflage, or solar cells, is possible using multilayered thin-film schemes. An alternative to thin-film coating strategies, nanoscale patterns applied to the surface of a material, can create an effective medium between the substrate and air. Such structures provide broadband antireflection over a wide range of incident light angles when nanoscale, sub-wavelength textures are sufficiently tall and closely spaced. In this work, we enhance the broadband antireflection properties of a nanofabricated moth eye structure through simultaneous control of both the geometry and optical properties, using block copolymer self assembly to design nanotextures that are sufficiently small to take advantage of a beneficial material surface layer that is only a few nanometers thick.

Self-assembly based approaches to produce texturing reduce reflections from surfaces to less than 1% across entire visible and near infrared spectrum and across a wide range of incident light angles. Furhter, based approaches to material design are scalable for the manufacture of large-area photovoltaic devices, with potential for implementation in silicon, silicon nitride, and glass, among others.

CFN Capabilities: CFN's Material Synthesis Facilities were used for block copolymer self assembly and atomic layer deposition. The Nanofabrication Facility provided reactive ion etching. Scanning electron microscopy was performed in the Electron Microscopy Facility.

  • Artificial moth eyes enhance the performance of silicon solar cells
    An image of a silicon moth eye, fabricated by polymer self-assembly.
  • Artificial moth eyes enhance the performance of silicon solar cells
    A polished, highly reflective silicon solar cell (right) turns completely black (left) after the application of surface nanotexture.

More information: "Sub-50-nm self-assembled nanotextures for enhanced broadband antireflection in silicon solar cells." Nature Communications 6, Article number: 5963 DOI: 10.1038/ncomms6963

Journal information: Nature Communications

Citation: Artificial moth eyes enhance the performance of silicon solar cells (2015, July 23) retrieved 28 March 2024 from https://phys.org/news/2015-07-artificial-moth-eyes-silicon-solar.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Self-assembled nanotextures create antireflective surface on silicon solar cells

73 shares

Feedback to editors